Connect Windows 10

Tip: You can access this site from on campus, including from a dedicated network for performing initial configuration of devices to connect to the University Wi-Fi. To connect to this special network, choose network name / SSID 'UoR-Setup' and enter network key 'ConnectMe' when prompted.

These instructions explain how to connect a Windows 10 computer to the eduroam wireless network.

  1. Download and run the Windows 10 setup wizard.
    You may be prompted to accept a number of changes to your system, it is important to allow all these changes to be made.
  2. As part of the installation, you will be asked for a username and password:

    Installation window

    Your username is your University username with on the end (e.g.
    The password is your University password.
  3. Once installation has completed, choose eduroam from the list of Wi-Fi networks on your computer.


If you cannot connect, check that:

  • The wireless functionality in your computer is enabled.
  • You are at a location with good signal strength.
  • You have remembered to add to the end of your username.
  • You are typing your University password correctly.
  • You have installed all available driver updates for your Wi-Fi adapter and all applicable Windows Updates.

These instructions will only work if you have a University of Reading username - if you are from a different organisation, you will need to refer to your home organisation for the correct instructions.

If you require further assistance, please contact the IT service desk.

Page navigation

QR Code

QR Code for this page